Blog

Home / Blog
Self insulation block silica fume

Self insulation block silica fume

Blog
Composite insulation block is based on the current status of the new wall materials industry development, with high performance microsilica hollow block as shell, fill light thermal insulation materials such as foam micro silica fume powder or polystyrene foam, microsilica density and heat preservation material injection molding into the entirety and form silica fume block with building envelope and heat…
Read More
Special micro silica fume powder in wear-resistant floor

Special micro silica fume powder in wear-resistant floor

Blog
The silica fume in wear-resistant floor can fully disperse, filling in the gap between the cement particles, the slurry is more dense, microsilica volcano ash activity index reached 110, effectively substitution coefficient reach 3-4, especially after cement hydration Ca (OH) 2 have strong absorption, form well developed calcium silicate gel, greatly enhance the strength of the floor. Strength increase: when…
Read More

Silica fume hs code factory

Blog
Silica fume HS code: 25120090 Silica fume with less than 1µm is more than 80%, the average particle size is 0.1 - 0.3 um, pecific surface area: 20 - 28m2/g. The fineness and specific surface area are about 80-100 times of the cement and 50-70 times of the fly ash.
Read More
Condensed silica fume in concrete factory

Condensed silica fume in concrete factory

Blog
Composition: Condensed silica fume consists primarily of pure silica in non-crystalline form and contains more than 90% silicon dioxide. Small amounts of magnesium, iron, and alkali oxides are also present. Most particles are smaller than 1 mm with an average diameter of 0.1 mm. ASTM C 1240 limits the percent retained on the 45-mm sieve to 10%, the moisture content…
Read More
Buy ceramic admiture silica fume

Buy ceramic admiture silica fume

Blog
Silica fume (microsilica) is produced in the arc fusion process when silica is separated from Zirconium Silicate. The resulting fume is very fine amorphous material with purity above 87%, a BET surface area of 12-20 m2/g, and pH range of 5-8. There are hundreds of industrial uses for fumed silica in sealant formulations, rheology control, and emulsification agents.
Read More
Super dispersibility undensified microsilica

Super dispersibility undensified microsilica

Blog
The undensified microsilica describes condensed silica fume sourced directly from a silicon or ferro silica furnace; the bulk density at source can be as low as 150kg/m3 and has the consistency of a thick smoke. The bulk density of undensified silica fume is <400 kg/m3. Naturally occurring amorphous silica can have bulk densities in the same range as undensified silica…
Read More
Harga silica fume per kg

Harga silica fume per kg

Blog
Approx. Price: $ USD 0.5 /Kilogram harga silica fume per kg: Rs 35/Kilogram Product Details: Minimum Order Quantity: 1000 Kilogram Grade: Industrial Packaging Size: 25 Kg Packaging Type: HDPE Bag Color: Grey Benefits of Microsilica in Concrete Aditive Longer service life: Microfine is a highly reactive pozzolan and gives concrete denser Microstructure, Lower Permeability & Higher Electrical Resistivity leading to improved…
Read More
Control of concrete temperature and crack

Control of concrete temperature and crack

Blog
Concrete plays an important role in the construction of modern engineering. However, the cracks in concrete are more common, and the cracks in the bridge engineering are almost everywhere. Although various measures are taken during the construction, the cracks still occur. In mass concrete, the temperature stress and temperature control are great significance. First of all, in the construction of…
Read More
Disadvantages of silica fume in high performance concrete

Disadvantages of silica fume in high performance concrete

Blog
1. self contraction. Due to the high performance concrete in water evaporation and condensation of microtubule contraction, make the concrete surface fission, anti-carbonation of high performance concrete, freeze-thaw cycle effect and anti chloride ion diffusion is disadvantageous, reduces the durability of high performance concrete; 2. The surface crack caused by wet expansion. High performance concrete has high cement content and…
Read More
Refractory admixture silica fume

Refractory admixture silica fume

Blog
Silica Fume is widely used in refractory industry. The practical application in the following aspects: 1.Instead of pure aluminum oxidation mud as refractory materials 2. As additive production in amorphous and shaped refractory products, greatly improve strength, high temperature performance. 3. Used as coagulant agent in the pouring of steel barrel’s monolithic lining. 4. As binder, coagulant agent, additives in…
Read More