Blog

Home / Blog
Condensed silica fume in concrete factory

Condensed silica fume in concrete factory

Blog
Composition: Condensed silica fume consists primarily of pure silica in non-crystalline form and contains more than 90% silicon dioxide. Small amounts of magnesium, iron, and alkali oxides are also present. Most particles are smaller than 1 mm with an average diameter of 0.1 mm. ASTM C 1240 limits the percent retained on the 45-mm sieve to 10%, the moisture content…
Read More
Buy ceramic admiture silica fume

Buy ceramic admiture silica fume

Blog
Silica fume (microsilica) is produced in the arc fusion process when silica is separated from Zirconium Silicate. The resulting fume is very fine amorphous material with purity above 87%, a BET surface area of 12-20 m2/g, and pH range of 5-8. There are hundreds of industrial uses for fumed silica in sealant formulations, rheology control, and emulsification agents.
Read More
Super dispersibility undensified microsilica

Super dispersibility undensified microsilica

Blog
The undensified microsilica describes condensed silica fume sourced directly from a silicon or ferro silica furnace; the bulk density at source can be as low as 150kg/m3 and has the consistency of a thick smoke. The bulk density of undensified silica fume is <400 kg/m3. Naturally occurring amorphous silica can have bulk densities in the same range as undensified silica…
Read More
Harga silica fume per kg

Harga silica fume per kg

Blog
Approx. Price: $ USD 0.5 /Kilogram harga silica fume per kg: Rs 35/Kilogram Product Details: Minimum Order Quantity: 1000 Kilogram Grade: Industrial Packaging Size: 25 Kg Packaging Type: HDPE Bag Color: Grey Benefits of Microsilica in Concrete Aditive Longer service life: Microfine is a highly reactive pozzolan and gives concrete denser Microstructure, Lower Permeability & Higher Electrical Resistivity leading to improved…
Read More
Control of concrete temperature and crack

Control of concrete temperature and crack

Blog
Concrete plays an important role in the construction of modern engineering. However, the cracks in concrete are more common, and the cracks in the bridge engineering are almost everywhere. Although various measures are taken during the construction, the cracks still occur. In mass concrete, the temperature stress and temperature control are great significance. First of all, in the construction of…
Read More
Disadvantages of silica fume in high performance concrete

Disadvantages of silica fume in high performance concrete

Blog
1. self contraction. Due to the high performance concrete in water evaporation and condensation of microtubule contraction, make the concrete surface fission, anti-carbonation of high performance concrete, freeze-thaw cycle effect and anti chloride ion diffusion is disadvantageous, reduces the durability of high performance concrete; 2. The surface crack caused by wet expansion. High performance concrete has high cement content and…
Read More
Refractory admixture silica fume

Refractory admixture silica fume

Blog
Silica Fume is widely used in refractory industry. The practical application in the following aspects: 1.Instead of pure aluminum oxidation mud as refractory materials 2. As additive production in amorphous and shaped refractory products, greatly improve strength, high temperature performance. 3. Used as coagulant agent in the pouring of steel barrel’s monolithic lining. 4. As binder, coagulant agent, additives in…
Read More
What is Silica fume hazards?

What is Silica fume hazards?

Blog
Product Name: Silica Fume Synonym: Microsilica, amorphous silica Physical State: Powder Color: Grey Odor: Odourless PH: Not available Vapor pressure: Not applicable Viscosity: Not applicable Boiling point: Not applicable Freezing/Melting point: 1,580 C Auto-ignition temperature: Not applicable Flash point: Not applicable Explosion limits: Lower/Upper: Not available Decomposition temperature: Not available Solubility in water: Insoluble Specific gravity/Density: 2100-2300 kg/m3 Bulk density:…
Read More
Microsilica wt -90d factory

Microsilica wt -90d factory

Blog
Place of Origin: China (Mainland) Brand Name: Henan Superior Abrasives Model Number: 90D Application: Microsilica in Concrete Shape: ultr-fine powder Dimensions: Grade 85,90,92,94,96 Chemical Composition: SiO2 Color: Grey,white or dark Fluidity: MIN.100MM Standard: ASTM C-1240 Cas No.: 69012-64-2 Microsilica microsilica , also called silica fume or micro silica, is a byproduct of producing silicon metal or ferrosilicon alloys. Silicon metal…
Read More
China effect of silica fume in concrete

China effect of silica fume in concrete

Blog
Silica fume can be used either as a densified or undensified powder, a slurry, as combination at the concrete mixer, or part of a factory-blended cement. Generally, the comparisons are made against a concrete made with 100% CEM I (Portland cement). The following terms are used with specific meanings: - blending: mixing together cementitious components either at the concrete mixer…
Read More